Products
GARPLAST APP
APP Modified bituminous plastomeric waterproofing membrane specially blended to obtain excellent heat resistant, U.V resistance and cold temperature flexibility. Reinforced with a core spun bonded non-woven polyester carrier to obtain excellent tensile and lap joint strength, elongation, tear and puncture resistance. The polyester combines high tensile strength and elongation. The special polymer modifier used has great resistance to ultra-violet radiation. Surfaced with P.E. Film on both sides.
Features
Functions
GARPLAST is used as double/single layer for waterproofing/damp proofing membrane for protection of various substrates in wide range of applications, such as Inverted Roofs & parapets, Terraces, balconies & patios, sunken slabs, bridges & tunnels, concrete foundations, tanking in basements, pile heads, swimming pools, airport aprons & ramp areas etc.
GARPLAST MINERAL
APP Modified bituminous plastomeric waterproofing membrane specially blended to obtain excellent heat resistant, U.V resistance and cold temperature flexibility. Reinforced with a core spun bonded non-woven polyester carrier to obtain excellent tensile and lap joint strength, elongation, tear and puncture resistance. The polyester combines high tensile strength and elongation. The special polymer modifier used has great resistance to ultra-violet radiation. Surfaced with mineral granules (slate) on top and P.E Film at the bottom and overlap sides.
Features
Functions
Typically used as an exposed layer of waterproofing system and general waterproofing uses.
GARPROOF SBS
SBS modified bitumen elastomeric waterproofing membranes manufactured from a rich mixture of bitumen and selected SBS (Styrene Butadiene Styrene) polymers blended together to obtain excellent waterproofing and low temperature flexibility properties. The polymerized bitumen is coated onto a dimensionally stable reinforcement core of non-woven spun bond polyester. The membrane has excellent tensile & tear strengths and has a high fatigue and puncture resistance. It is very flexible and easy to install and is suitable for use in areas where high structural movements are expected. Surfaced with P.E. Film on both sides
Features
Functions
GARPROOF membrane is used as double/single layer for waterproofing/damp proofing membrane for protection of various substrates in wide range of applications, such as Inverted Roofs & parapets, Terraces, balconies & patios, sunken slabs, bridges & tunnels, concrete foundations, tanking in basements, pile heads, swimming pools, airport aprons & ramp areas etc.
GARSEAL 1.6 & 2 mm
GARSEAL is an elastomeric modified bitumen waterproofing membrane manufactured from a rich mixture of bitumen and selected SBS (Styrene Butadiene Styrene) polymers, Vapour and water proof uniquely formulated membrane to provide high flexibility self-adhesive properties suitable for high or low temperature applications. Excellently providing high performance resistance to Methane, Random and CO2.Surfaced with tough cross laminated high density P.E and overlap on top side and silicon self-release on bottom side hence proper protection.
Features
GARSHIELD
GARSHIELD BOARD are typically semi rigid protection boards for all types of vertical torch applied modified bitumen membranes against mechanical stress and impact. It provides permanent protection to most waterproofing and damp proofing systems. Its high puncture resistance protects the waterproofing membrane from any impact by sharp aggregates during the back-fill process and other later settlements. Its own waterproofing characteristics will improve the overall waterproofing ability of the system.
Features
GAR SB PRIMER D-41 (SOLVENT BASED)
GAR SB PRIMER is a cold applied, Solvent Based stable bituminous primer containing high quality selected Bitumen. This is an asphaltic primer suitable for uses in roofing, damp proofing and waterproofing surface dressing to masonry or concrete to improve the bond of bituminous materials.
Special Features
Uses
GAR SB PRIMER is suitable for use with asphalt in roofing, dam proofing and waterproofing below and above ground level, for application to concrete, masonry, metal and asphalt surfaces. Also used as a primer coat to receive membranes or liquid asphalts and asphalt products.
GAR WB EMUSLION(WATER BASED)
Introduction
GAR WB EMULSI0N is an outstanding water based thixotropic, anionic cold applied bitumen emulsion, containing high quality selected bitumen and emulsifying agents. Used as a protective coating for metal, roofing, damp proofing basement and masonry or concrete foundations
Special Features
Uses
for more information about products kindly contact at info@garqa.com